CLIP IN SYSTEM CARRIER AND ACCESSORIES UNIT/m2 ANALYSE.
|
Product
|
600*600 mm module
|
300*300 mm module
|
|
1.Omega Profile
|
2,50 m
|
3,60 m
|
|
2.U Profil
|
0,50 m
|
0,70 m
|
|
3.Hanger Bracket
|
0,70 pcs
|
0,70 pcs
|
|
4.Spring Clips
|
1,50 pcs
|
3,00 pcs
|
|
5.Ceiling Liner Connector
|
0,50 pcs
|
0,50 pcs
|
|
6.Perimeter Fixing Spring
|
1,00 pcs
|
2,00 pcs
|
|
7.Hanger Wire
|
0,70 pcs
|
0,70 pcs
|
|
8.Steel Anchor
|
0,70 pcs
|
0,70 pcs
|
*THIS ANALYSES ARE PREPARED FOR REQUIREMENTS FOR 30x30 cm 33 m2
*THIS ANALYSES ARE PREPARED FOR REQUIREMENTS FOR 60x60 cm 66 m2
Standards: TS-EN-13964-04 • ISO 9001 • ISO 14001 • CE •ISO 18001
Material: Pannels are made of corrosion resistant aluminium or hot dip galvanised steel that homogen, A1 Class Fire Resistant, with min. 70 microns of electrostatic polyester powder coated.
Perforation: Panels are available as flat (no perforation), full perforated, perforated with 5 or 10 cm borders.
Perforation hole diameters: Holes are 2,5 mm as standard and give %16 total perforation, any requested diameters are possible.
Aqoustic Performance: Alpha-w / NRC 0,70 with the aqoustic 0,2 mm thick fire proof fabric inside.
Finishing detail of pannel: Clıp In metal plate with special connection point.
Carrier System: Roll formed, corrosion resistant hot dip galvanised homogen, A1 Class Fire Resistant steel
Pannel Dimensions: 600x600mm, 300x300mm or any required dimension.
Maximum Curve: According to standard TSE-EN-13964 “Suspended Ceilings – Requirements and Test Methods” for metal suspended ceiling pannels, maximum curve should be 0,05mm after 28 days under load.
Carrier system: According to standard TSE-EN-13964 our profiles load carrying capacity is tested and achieved the load carrying performance with less than 0,2 mm. curve.
Material Colour:
Pannels : RAL 9016 White as Standard or any requested RAL colour
Carriers : Special colours, RAL 9016 white as standard or any requested RAL colour.
